Standard Single
Comes with 2 hinges and a
standard striker.

Left hand opening	Right hand opening

Standard Double
Comes with 2 hinges on
both sides.

Standard Triple
Comes with 6 hinges, a mullion
and striker, with fixed bottom rail.

Left hand opening

Right hand opening

Standard Quad
Comes with 2 hinges and a
standard striker.

5 Point Mitre Joint
A 5 point mitre joint for superior strength which leaves a fantastic accurate finish.

Hinges
Standard 1.6 zinc-plated 100 x 75 hinges are used on all frames. Other hinges are available on request.

Back Openings
JDS can supply doorframes in two back openings. 95mm for Modular Bricks 114mm for Standard Bricks

Brick Ties
All frames are supplied with brick ties upon delivery.

Stud Frame Clips
Stud frame clips are available when the frame is being used with a steel or timber wall framing stud system. Extra charge applies.

Rubber Buffers
Rubber buffers are used on all frames to protect the door and reduce noise.

Frame
The frame itself is made from 1.1mm Galvanneal for extra rust resistance and structural strength.

Striker Plate
The stainless steel striker is screwed into place with 2 stainless steel screws and comes with an adjustable tongue. The striker is placed at 1000mm A.F.L or as required.

Temporary Bottom Rail
A 1.1mm galvanised bottom rail is used for maintaining the frame’s integrity during transportation and installation.